Yamaha DME64N Owner's Manual page 96

Dme designer
Hide thumbs Also See for DME64N:
Table of Contents

Advertisement

Chapter 3 Main Panel Window
[Open File Dialog]
Displays the file select dialog box. You can select a library file that is saved in the folder set as the
Contents Folder, and read it.
[Add] Button
When you click here, External Input and the file select list is displayed.
To add a Wave file, select the row to which it is to be added and click the [Add] button.
It is also possible to add Wave files by dragging and dropping the files from the desktop directly
onto the list in the "Wav File Manager" window.
[Wave File]
The file selection dialog box is displayed, where you can select a Wave file.
If the selected table already has data, an overwrite confirmation dialog box is displayed.
[External Input]
Sets [External Input].
You can select multiple Wave files. If multiple files are specified, they are added after the selected
table. If a Wave file is registered to the number being added, it will be overwritten.
The following Wave file formats are supported: 48, 44.1, 24, 22.05 kHz, 16bit/8bit, Mono/Stereo. If a
file is selected with a format different than these, a message is displayed that says the file cannot
be used.
There is an upper limit to size beyond which a file cannot be used. This limit varies according to the
format. If the size of the selected file is beyond the limit, a message is displayed that says the file
cannot be used.
22.05 K Mono 8 bit
22.05 K Stereo 8 bit
22.05 K Mono 16 bit
22.05 K Stereo 16 bit
24.05 K Mono 8 bit
24 K Stereo 8 bit
24 K Mono 16 bit
24 K Stereo 16 bit
[Remove] Button
Deletes settings from the selected line. This button is grayed out when no Wave file is selected in
the list.
[Up] Button
Moves the selected line up one. It is switched with the line immediately above.
The button will be grayed out if nothing is selected in the list, or if [No. 1] is selected in the list.
[Down] Button
Moves the selected line down one. It is switched with the line immediately below.
The button will be grayed out if nothing is selected in the list, or if [No. 100] is selected in the list.
96
DME Designer Owner's Manual
1.37 MB
44.1 K Mono 8 bit
2.75 MB
44.1 K Stereo 8 bit
2.75 MB
44.1 K Mono 16 bit
5.5 MB
44.1 K Stereo 16 bit
1.5 MB
48 K Mono 8 bit
3 MB
48 K Stereo 8 bit
3 MB
48 K Mono 16 bit
5.9 MB
48 K Stereo 16 bit
2.75 MB
5.5 MB
5.5 MB
5.9 MB
3 MB
5.9 MB
5.9 MB
5.9 MB

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dme24nDme4io-cDme8i-cSp2060Dme8o-cDme designer 2.0

Table of Contents