Dynamics - Yamaha DME64N Owner's Manual

Chapter 6 Component Guide
NOTE
Delay Scale does not support the parameter link feature. Refer to "Parameter Link" on
linking.

Dynamics

Components in the dynamic group adjust the dynamic range of the sound. There are eight types of
components, each of which is available in mono channel and stereo channel versions. The eight types
are: compander hard, compander soft, compressor, de-esser, ducking, expander, gate, and limiter.
KeyIn
All components in the dynamic group, except the de-esser, have KeyIn input. This is used as a
trigger source that activates the effects of the component.
The trigger source is set in the [KeyIn] section of the component editor.
The currently selected trigger source is displayed on the button. Click the button and select the
trigger source from the menu.
370 DME Designer Owner's Manual
Mono channel
• [SELF]
Sets the input signal as the trigger source for mono channel components.
• [L]/[R]
Sets the left or right input signal as the trigger source for stereo channel components.
• [LR BOTH]
Sets both the left and right input signals as the trigger source for stereo channel components.
The strongest input signal will be the trigger source, whether from the left or right channel.
• [KEYIN]
The KeyIn input will be the trigger source.
page 81
[KeyIn] Section
Stereo channel
for information on parameter