Router - Yamaha DME64N Owner's Manual

Chapter 6 Component Guide

Router

The router assigns inputs to outputs. Each of the six router groups has a different number of inputs.
The groups are 1 input, 2 input, 4 input, 8 input, 12 input and 16 input. Each group has five
components, with 2, 4, 8, 12, and 16 outputs.
1 Input
2 Input
4 Input
Double-click a component to display the component editor for it. The number of channels varies
depending on the component, but all share a common configuration in the component editor.
Routers let you route signals from various [Input] locations by connecting them to various [Output]
locations.
One output can be connected to one input only. A single input can be output to multiple channels, but
multiple inputs cannot be output over a single channel. In other words, you can distribute the inputs,
but you cannot mix them. You cannot setup routing for more signals than the number of output
channels.
424 DME Designer Owner's Manual
8 Input
12 Input
16 Input