Yamaha DME64N Owner's Manual page 357

The output number varies according to the component variation.
2 Way Low/High
3 Way Low/Mid/High
4 Way Low/Low-Mid/High-Mid/High
5 Way Sub-Low/Low/Low-Mid/High-Mid/High
6 Way Sub-Low/Low/Low-Mid/Mid/High-Mid/High
Set the attenuation curve for the lowest band and the middle bands with the Low Pass Filter (LPF) and
High Pass Filter (HPF), and the highest band with HPF. Each frequency band has its own color, with
Low being red, Mid being green, and so on. These correspond to the colors of the lines on the graph.
Crossover
When you click the [Crossover] button for the crossover processor, it opens the crossover editor
window.
[Crossover Processor-Crossover] editor window
1
6 3
7 8 4
2
5
Chapter 6 Component Guide
DME Designer Owner's Manual 357