Yamaha DME64N Owner's Manual page 409

Double-click a component to display the component editor for it. The number of input and output
channels varies depending on the component, but all share a common configuration in the
component editor.
The matrix mixer component editor consists of four sections: input, output, matrix, and block. The
[Master] buttons in the [Input] and [Output] sections display windows where you can make master
input and output settings. The level for each channel is set in separate windows that display four
channels each.
Section
1
Input
2
Output
3
Matrix
4
Block
5
6
7
Matrix Mixer component editor
2
3
1
Name
Master Opens the Input Master window.
Master Opens the Output Master window.
Output level These meters display the output level for each channel.
Clicking here displays the Crosspoint window.
On Turns ON output for all channels in the Crosspoint window.
Lights the [ON] button (does not change the matrix mixer
component editor).
Off Turns OFF output for all channels in the Crosspoint window
(does not change the matrix mixer component editor).
Nominal Resets all output levels in the Crosspoint window, making
them 0 dB.
Minimum Resets all output levels in the Crosspoint window, making
them - dB.
Chapter 6 Component Guide
4
5
6
7
Function
DME Designer Owner's Manual 409