Midi Device Setup; Midi Port Setup (Windows)(When Starting File Utility As A Stand-Alone Application) - Yamaha File Utility Manual

MIDI Device Setup

You will need to specify the MIDI device drivers through which your computer will communicate with your
MIDI instrument (such as the MIDI instrument). If you are using a USB port, you should install the necessary
Yamaha USB MIDI driver. If you are using a COM port, you should install the necessary Yamaha CBX driver.
For sake of example in the explanations below, the MIDI instrument is connected to the computer via USB.
n
If you are using a Macintosh, refer to the section "OMS Settings" on
MIDI Port Setup (Windows)
(When starting File Utility as a stand-alone application)
1.
Click the [Setup] button to open the "MIDI Setup" window.
Setup button
n
Regarding the settings here, refer to the owner's manual of the MIDI instrument or the client application software
(if starting the File Utility as a plug-in application in the OPT).
2.
Click the [ ] button at the right end of each box and select the driver as follows.
MIDI In .................................Select "YAMAHA USB IN 0-1."
MIDI Out 1 ...........................Select "YAMAHA USB OUT 0-1."
MIDI Out 2~4 .......................Select nothing. Keep this box set to "NONE."
MIDI Thru .............................Select nothing. Keep this box set to "NONE."
3.
Click the [OK] button to close the dialog and the setup becomes active.
4.
Select "MIDI Port Setup" from the Setup menu.
The "Setup MIDI Ports" dialog box is displayed.
page 10.
9