Getting Started; Cl Series Network Setup; Ipad Wi-Fi Settings - Yamaha CL3 User Manual

Yamaha Commercial Audio

3.0 Getting Started

3.1

CL Series Network Setup

I. Connect the Wi-Fi access point to the CL series console's network port via a
CAT5 cable. Note that a cross-over cable will be needed with older access
points that don't have the "auto MDIX" function. Most recent devices will
support "auto MDIX", in which case a straight CAT5 cable can be used.
II. Note the IP address and MAC address of the CL series console - they will
need to be entered into the iPad later. They can be found in the console as
follows:
a. Press the [SETUP] button on the CL series touchscreen
b. Press [NETWORK] on the CL series touchscreen
3.2

iPad Wi-Fi Settings

The iPad needs to be given a static IP address in the same range as the CL
series' IP Address.
a. Open the iPad "Settings" menu
b. Select "Wi-Fi", and choose the correct network
CL StageMix V3.0 User Guide
Page 5