Yamaha Commercial Audio
3.0 Getting Started
3.1
LS9 Network Setup
I. Connect the WiFi access point to the LS9's network port via a CAT5 cable.
Note that a cross-over cable will be needed with older access points that don't
have the "auto MDIX" function. Most recent devices will support "auto MDIX",
in which case a straight CAT5 cable can be used.
II. Note the IP address and MAC address of the LS9 - they will need to be
entered into the iPad later. They can be found in the console as follows:
Press the [SETUP] button on the LS9 to access the MISC SETUP screen
3.2
iPad WiFi Settings
The iPad needs to be given a static IP address in the same range as the LS9's
IP Address.
a. Open the iPad "Settings" menu
b. Select "Wi-Fi", and choose the correct network
c. Press the blue circle with the white arrow to the right of the selected
network to edit the IP address.
LS9 StageMix V1.0 User Guide
Page 5