Advanced Configuration; Target Link Speed: All Hbas - Qlogic SANsurfer FC/CNA HBA CLI User Manual

3: Apply Changes to selected Target(s)
4: Return to Previous Menu
Note: 0 to return to Main Menu
Enter Selection:

Advanced Configuration

5: Target Link Speed n: Port Number
When you select a port instance from the Target Link Menu, the Target Link
Speed Menu (Advanced) appears. It includes the link speed options. The options
vary according to the adapter in use. For example:
1 Gbps
2 Gbps
4Gbps
8 Gbps
Type the number for the link speed you want for the adapter port instance
selected, and then press ENTER.
The same menu reappears, allowing you to set the link speed for every port
instance you want.
When you have set the speed for all the links you want, type the number for Apply
changes to Selected Target(s), and then press ENTER.

Target Link Speed: All HBAs

5: Target Link Speed 2: All HBAs
When you select this option, the Target Link Speed Menu for All HBAs appears.
It offers two options:
Basic configuration
Advanced Configuration
SN0054614-00 K
Target Link Speed or iiDMA Settings Menu (Command Line Option -q)
Vendor
Product ID
Product Rev
Serial Number
Port Name
Port ID
Intelligent Interleave Factor: 4 Gbps
2: Advanced Configuration
3–Interactive Commands
: SEAGATE
: ST118273 CLAR18
: SG1D
: LP60266900001919HQ1K
: 21-00-00-20-37-11-FF-EF
: 11-01-E8
3-51