Qlogic SANsurfer FC/CNA HBA CLI User Manual page 64

3–Interactive Commands
General Information Menu (Command Line Option -g)
Adapter VPD Header (Vital Product Data) Information (for QLA/QLE24xx
and QLE81xx only)
The actual VPD information:
Adapter Parameters Settings Header (Command Line Options -c)
Adapter Parameter Settings
3-12
Actual Connection Mode
Actual Data Rate
PortType (Topology)
Target Count
PCI Bus Number (Windows and Linux)
PCI Device Number (Windows and Linux)
Adapter Status (online, offline)
Adapter Instance
Adapter Type
Port Number
WWPN
Port ID
Product Identifier
Part Number
Serial Number
Misc. Information (for example, PCI and PCI-X speeds)
Manufacturing ID
EFI Driver Version
Firmware Version
BIOS Version (Windows and Linux)
FCode Version (Solaris)
Flash Image Version
Adapter Instance
Adapter Part Number
Port Number
WWPN
Port ID
Connection Options
Data Rate (QLA23xx, QLA24xx, QLE23xx, and QLE24xx adapters)
Frame Size
Hard Loop ID
Loop Reset Delay (in seconds)
Enable Host Adapter BIOS
Enable Hard Loop ID
Enable FC Tape Support
Operation Mode
SN0054614-00 K