Variables Used In Arguments; Help Commands - Qlogic SANsurfer FC/CNA HBA CLI User Manual

D

Help Commands

Table D-2
only one command line option per input file is valid. The hyphen (-) and slash (/)
characters are equivalent. For example, scli -g and scli /g are both valid
commands.
Table D-1
Table D-2.
Variable
<address>
<hba instance>
<hba wwpn>
<enable value>
<file name>
<lock value>
<log id>
<lun id>
<lun name>
<percent>
<priority>
<speed>
<target id>
<target portid>
<target wwnn>
SN0054614-00 K
is an alphabetic listing of the Help commands. Unless otherwise noted,
describes each variable used in the command line arguments shown in
Table D-1. Variables Used in Arguments
IP address.
Adapter instance number of an adapter port.
World wide port name of an adapter port.
(xx-xx-xx-xx-xx-xx-xx-xx or xxxxxxxxxxxxxx).
Enable value: 1 for enable or 0 for disable.
Firmware preload table .dat file
Lock value: 1 for lock or 0 for unlock.
FCoE log ID (0–x).
Logical unit number of a LUN.
Persistent device name assigned to the designated LUN.
Value of bandwidth percent.
Priority value: low, medium, or high.
Link speed.
ID of a target device.
Port ID of a target device. (xx-xx-xx or xxxxxx).
World wide node name of a target device.
(xx-xx-xx-xx-xx-xx-xx-xx or xxxxxxxxxxxxxx).
Description
D-1