Reset Test Parameters (Loopback); Configure Test Parameters (Loopback) - Qlogic SANsurfer FC/CNA HBA CLI User Manual

3–Interactive Commands
Diagnostics Menu (Command Line Options -kl, -kr, and -dm)
Data Size (Bytes)
Number of test(s)(1-65535)
Test Increment(1-65535)
On Error
Test Continuous
Loopback Type
------------------------------------------------------------------------------

Reset Test Parameters (Loopback)

12: Diagnostics n: Port Number
Select this option to reset the current loopback test parameters to the defaults.
The default settings are restored immediately.
Restoring default settings ..., done.

Configure Test Parameters (Loopback)

12: Diagnostics n: Port Number
Select the Configure Test Parameters option to set the parameters for the
loopback test. For example:
Diagnostic Menu (Loopback)
HBA Instance 2 (QLE2562 Port 1) : Online
1:
2:
3:
4:
5:
6:
7:
8:
Table 3-10
3-80
: 512
: 65535
: 1
: Ignore
: OFF
: External Loopback
1: Loopback Test 2: Reset Test Parameters
1: Loopback Test 3: Configure Test Parameters
WWPN: 21-00-00-1B-32-1B-4E-4C
Desc: QLE2562 PCI Express to 8Gb FC Dual Channel
Data Pattern
Data Size
Number of Test(s)
Test Increment(s)
On Error Policy
Enable/Disable Test Continuously
(displayed for 8Gb adapters only)
Loopback Type
Return to Previous Menu
shows the diagnostics configuration settings.
SN0054614-00 K