Host Topology (Command Line Option -Tp - Qlogic SANsurfer FC/CNA HBA CLI User Manual

<TXPowerHighWarning> "value" </TXPowerHighWarning>
<TXBiasLowWarning> "value" </TXBiasLowWarning>
<TXBiasHighWarning> "value" </TXBiasHighWarning>
<VccLowWarning> "value" </VccLowWarning>
<VccHighWarning> "value" </VccHighWarning>
<TempLowWarning> "value" </TempLowWarning>
<TempHighWarning> "value" </TempHighWarning>
<ReservedWarning> "value" </ReservedWarning>
<ReservedWarning> "value" </ReservedWarning>
<ReservedWarning> "value" </ReservedWarning>
<ReservedWarning> "value" </ReservedWarning>
<ReservedWarning> "value" </ReservedWarning>
<ReservedWarning> "value" </ReservedWarning>
<RXPowerLowWarning> "value" </RXPowerLowWarning>
<RXPowerLowWarning> "value" </RXPowerLowWarning>
<VendorSpecific> "value" </VendorSpecific>
</Address_A2>
</HBA>
<Status> n </Status>
<?ErrorMsg> "message" </ErrorMsg?>
<Reboot> n /Reboot>
</QLogic>
Host Topology
(Command Line Option -tp)
The command format is:
scli -tp -x2
The XML Format 2 for an adapter type interconnect element is as follows (this
example shows a switch):
<?xml version="value" encoding="value"?>
<QLogic>
<AppName>SANsurfer FC/CNA HBA CLI</AppName>
<AppVersion>vn.n.nn Build nn</AppVersion
<AppXmlVersion>n.nn</AppXmlVersion>
<InterConnectElement Type="Switch">
<SwitchWWPN="value"
DomainID="value"
ManagementID="value"
IPAddress="value"
Model="value"
SymbolicName="value"
SerialNumber="value"
MACAddress="value"
FirmwareVersion="value"
PortCount="value"
SN0054614-00 K
B–XML Format 2
XML Format 2 Tags for Each Option
B-25