Utilities Menu; Update Flash (Per Adapter Port Or All Hbas) (Command Line Option -B); Save Flash (Per Adapter Port) (Command Line Option -B And Reserved Word "Save"); Update Hba Parameters (Per Adapter Port Or All Hbas) (Command Line Option -R) - Qlogic SANsurfer FC/CNA HBA CLI User Manual

3–Interactive Commands

Utilities Menu

Parameter Name
<param name>
NewOnly
BindWWPN
BindPortID
Table Notes
Driver Parameter NewOnly (NO) is supported only with the failover driver.
a
Utilities Menu
10: Utilities
The Utilities Menu provides options for saving and restoring Flash and adapter
parameters. You can save adapter parameters in either a generic file or in a
server manufacturer template such as QLogic, HP, IBM, EMC, and so on. Saving
parameters in a template provides the advantage of tailored, default settings
optimized for best results within the context.
When you select this option, SANsurfer FC/CNA HBA CLI shows the following
utilities options:
Update Flash (see
Save Flash (see
Update HBA Parameters (see
Save HBA Parameters (see
HBA Parameters Templates (see
Update Driver (Windows only) (see
Update Firmware Preload Table (8Gb adapters only) (see
Save Firmware Preload Table (8Gb adapters only) (see
Update MPI Config Table (see
Save MPI Config Table (see
Driver Rescan (Solaris with QLA driver only) (see
Firmware Area Update (8Gb adapters only) (see
Firmware Area Save (8Gb adapters only) (see
Each of these menu options is described in this section.
3-64
Table 3-4. Driver Settings (Continued)
Alias
<param
alias>
NO
a
BW
BP
page 3-65)
page 3-65)
Value
<param
value>
0, 1 Present targets with driver
default.
0, 1 Bind devices by WWPNs.
0, 1 Bind devices by port IDs.
page 3-65)
page 3-66)
page 3-66)
page 3-69)
page 3-71)
page 3-71)
page
page
page
Description
page 3-69)
page 3-70)
3-72)
3-72)
3-74)
SN0054614-00 K