Solaris X86 9 And 10 Installation - Qlogic SANsurfer FC/CNA HBA CLI User Manual

/opt/QLogic_Corporation/SANsurferCLI/libs/libqlsdm.so
/opt/QLogic_Corporation/SANsurferCLI/menu.properties
/opt/QLogic_Corporation/SANsurferCLI/nvramdefs/default/nvram2
2.dat
/opt/QLogic_Corporation/SANsurferCLI/nvramdefs/default/nvram2
3.dat
. . .
Installation of <QLScli> was successful.

Solaris x86 9 and 10 Installation

Follow these steps to install SANsurfer FC/CNA HBA CLI on a Solaris x86 9 or 10
operating system.
To install SANsurfer FC/CNA HBA CLI on Solaris x86 9 or 10:
1. From the QLogic Web site or the SANsurfer for FC and FCoE Adapters
CD-ROM, download to a temporary directory (for example, /tmp) on your
machine the following file:
NOTE:
2. To decompress the file, type the following:
# uncompress scli-x.xx.xx-xx.x86.Solaris.pkg
3. To see the available package file, type the following:
The available packages appear. For example:
4. To install SANsurfer FC/CNA HBA CLI, type the following:
# pkgadd -d scli-x.xx.xx-xx.SPARC-X86.Solaris.pkg
5. You are prompted to select a package. For example:
The following packages are available:
1 QLSclix QLogic SANsurfer FC/CNA HBA CLI (HBA Configuration
Utility)
SN0054614-00 K
scli-x.xx.xx-xx.x86.Solaris.pkg
In the file name, x.xx.xx-xx stands for the current version of
SANsurfer FC/CNA HBA CLI. The -xx stands for the build version.
# ls
# scli.x.xx.xx-xx.SPARC-X86.Solaris.pkg
(i386) x.xx.xx Build xx
1–Installation and Removal
Installing SANsurfer FC/CNA HBA CLI
1-17