Qlogic SANsurfer FC/CNA HBA CLI User Manual page 318

D–Help Commands
Command
Line Action
–ls ( <hba instance> | <hba wwpn> )
{ ( <param name> | <param
alias> ) <param value> }
–m ( <hba instance> | <hba wwpn> )
( view | ? )
–m ( <hba instance> | <hba wwpn> )
<target wwnn> <target wwpn>
<lun id> ( view | ? )
–m ( <hba instance> | <hba wwpn> )
select | enable <target wwnn>
<target wwpn>
–m ( <hba instance> | <hba wwpn> )
select all
–m ( <hba instance> | <hba wwpn> )
unselect | disable <target
wwnn> <target wwpn>
–m ( <hba instance> | <hba wwpn> )
unselect all
–m ( <hba instance> | <hba wwpn>)
{ <target wwnn> <target wwpn>
<lun id> (0 | 1 | enable | |
select | unselect ) }
–n ( <hba instance> | <hba wwpn> )
{ ( <param name> | <param
alias> ) <param value> }
–n ( <hba instance> | <hba wwpn> |
<all> ) <OEM name>
–n ( <hba instance> | <hba wwpn> |
<all> ) default
–o <file name>
D-6
Table D-2. Help Commands (Continued)
Arguments Function
Shows the current link status on an adapter
port.
Views selective LUN information of all
devices attached to an adapter port.
Views selective LUN information of a single
device attached to an adapter port.
Configures all LUNs of a device attached to
an adapter port (Enable).
Configures all LUNs of all devices attached
to an adapter port (Enable).
Configures all LUNs of all devices attached
to an adapter port (Disable).
Configures all LUNs of all devices attached
to an adapter port (Disable).
Configures individual LUN of a device
attached to an adapter port.
Modifies the adapter parameters of an
adapter port.
Sets the adapter parameters of an adapter
port with a pre-defined OEM default tem-
plates.
Restores the adapter parameters of an
adapter port to factory default settings (4Gb
adapters or latest).
Writes the output to a named file. This
option can be combined with other options.
However, this option must be at the begin-
ning or at the end of the command line.
SN0054614-00 K