Link Statistics (Command Line Option -Ls - Qlogic SANsurfer FC/CNA HBA CLI User Manual

B–XML Format 2
XML Format 2 Tags for Each Option
<TargetBinding TargetWWNN="value" TargetWWPN="value"
TargetPortID="value" TargetID="value" />
> <BootDeviceInfo>
<BootParam EnableSelectableBoot="value" />
<BootDevice TargetWWPN="value" LUNID="value" />
> </BootDeviceInfo> <DriverSettings>
<Info PersistentPlusNew="value"
</DriverSettings>
</HBA>
<Status> n </Status>
<Reboot> n /Reboot>
</QLogic>
NOTE:
Link Statistics
(Command Line Option -ls)
The command format is:
scli -ls
alias>) <param value>] -x2
The XML Format 2 for the link statistics option is as follows:
<?xml version="value" encoding="value"?>
<QLogic>
<AppName>SANsurfer FC/CNA HBA CLI</AppName>
<AppVersion>vn.n.nn Build nn</AppVersion
<AppXmlVersion>n.nn</AppXmlVersion>
B-16
PersistentOnly="value"
BindbyWWPN="value"
BindbyPortID="value" />
The <HBA>...</HBA> sequence repeats for each adapter.
The <DriverSettings.../> sequence repeats for each adapter.
The <VPD Product Identifier.../> sequence repeats for each
adapter.
The <Target>...</Target> sequence repeats for each target.
The <LUN... /> sequence repeats for each LUN.
The <EnabledLUN ID.... /> sequence repeats for each enabled LUN.
The <TargetBinding.../> sequence repeats for each target persistent
binding entry.
The <BootDevice.../> sequence repeats for each boot device selection
entry.
(
<hba instance> | <hba wwpn>) [(<param name> | <param
SN0054614-00 K