Downloading The Installation Package - Qlogic SANsurfer FC/CNA HBA CLI User Manual

1–Installation and Removal

Downloading the Installation Package

Features Not Available When Running Linux with Converged Network Adapters
When running Linux OS with converged network adapters (QLE81xx and
QMI81xx), the following features are not available:
Support for inbox driver only; no driver update support
Persistent binding
Adapter port statistics
iiDMA support
Loopback test
Features Not Available When Running Sysfs Inbox Driver
When running the Sysfs Inbox driver on a Linux OS, the following features are not
available:
Persistent binding
Selective LUN
Adapter port statistics
Driver settings
Host topology
Link status
Loopback test
Features Not Available When Running VMware Driver
When running the VMware driver on a Linux OS, the following features are not
available with virtual ports:
Adapter parameters settings
Adapter parameters restore default
Flash update from file
Flash save to file
Adapter parameters update from file
Adapter parameters save to file
Adapter parameters update from templates
Downloading the Installation Package
Follow these steps to download the SANsurfer FC/CNA HBA CLI installation
package from the QLogic Web site.
To download the installation package:
1. From the QLogic home page (www.qlogic.com), click the Downloads tab.
2. On the Driver Downloads / Manuals
your adapter model, and operating system, and then click Go!
1-6
page, select Fibre Channel HBAs,
SN0054614-00 K