Target Persistent Binding: Unbind Targets (Command Line Option -P); Target Persistent Binding (All Hbas); Display Target Persistent Binding; Target Persistent Binding: Bind Targets - Qlogic SANsurfer FC/CNA HBA CLI User Manual

Type the number for the option you want, and then press ENTER.

Target Persistent Binding: Unbind Targets

(Command Line Option -p)
6: Target Persistent Binding
The Unbind Targets option is like the Bind Targets option (see
Persistent Bindings: Bind Target(s) (Command Line Option -p)" on page

Target Persistent Binding (All HBAs)

6: Target Persistent Binding
When you select this option, SANsurfer FC/CNA HBA CLI shows the following
options:
Display Configuration
Bind Target(s)
Unbind Target(s)

Display Target Persistent Binding

6: Target Persistent Binding
When you select the Display Configuration option, the following information
appears. (Or, the message, No target persistent binding configuration on HBA
instance n appears instead):
Bind status (Yes or No)
Device type (Disk, for example)
Target information (model name and number, for example)
Port Name
Port ID
Target ID

Target Persistent Binding: Bind Targets

6: Target Persistent Binding
See "Target Persistent Bindings: Bind Target(s) (Command Line Option -p)" on
page 3-55.
Target Persistent Binding: Unbind Targets
6: Target Persistent Binding
See "Target Persistent Binding: Unbind Targets (Command Line Option -p)" on
page 3-57.
SN0054614-00 K
Target Persistent Bindings Menu (Command Line Option -p)
1 - n: Target Persistent Binding HBA Instance n
p: All HBAs
p: All HBAs 1: Display Configuration
p: All HBAs 2: Bind Targets
p: All HBAs 3: Unbind Targets
3–Interactive Commands
3: Unbind Target(s)
"Target
3-55).
3-57