Qlogic SANsurfer FC/CNA HBA CLI User Manual page 235

/DriverSettings>
</HBA>
<Status> 0 </Status>
<Reboot> 0 </Reboot>
</QLogic>
Display All Information for One or All Adapters
(Command Line Option -z)
The XML Format 1 for all adapter information is more complicated than its
non-XML counterpart because the tags cannot be repeated. In non-XML mode,
SANsurfer FC/CNA HBA CLI sequentially calls all the options in
each option is shown in its standard output format. If each option shows its own
XML output, the resulting list would have multiple duplicate tags.
Non-
interactive
Option
-g
-i
-c
-t
-l
-p
-m
-e
The XML Format 1 for all adapter information is as follows:
<?xml version="1.0" encoding="ISO-8859-1"?>
<QLogic>
<AppName>SANsurfer FC/CNA HBA CLI</AppName>
<AppVersion>vn.nn.nn Build nn</AppVersion>
SN0054614-00 K
BindbyPortID="value" />
Table A-1. Options Shown by -z
Description
Show system information
Show adapter information
Show adapter settings
Show device list
Show LUN list
Target persistent binding
Selective LUNs
Boot device
XML Format 1 Tags for Each Option
See Section
"General Information Menu (Command
Line Option -g)" on page 3-4
"HBA Information Menu (Command Line
Option -i)" on page 3-19
"HBA Parameters Menu" on page 3-24
"Target/LUN List Menu (Command Line
Options -t and -l)" on page 3-36
"Target/LUN List Menu (Command Line
Options -t and -l)" on page 3-36
"Target Persistent Bindings Menu (Com-
mand Line Option -p)" on page 3-54
"Selective LUNs Menu (Command Line
Option -m)" on page 3-58
"Boot Device Menu (Command Line Option
-e)" on page 3-60
A–XML Format 1
Table A-1, and
A-11