Fcoe Utilities Menu For Qlx81Xx Adapters (Command Line Option -Cna) - Qlogic SANsurfer FC/CNA HBA CLI User Manual

scli -fcoe ( <hba instance> | <hba wwpn> ) --log --list
To show a specific log entry by Log ID, enter the following command:
scli -fcoe ( <hba instance> | <hba wwpn> ) --log --id <logid>
Link Events
16: FCoE 3: Logs:
Select the Link Events option to show information similar to the following
example:
---------------------------------------
LogID=8 LogName=Link Events
---------------------------------------
000:00:01:58:480 Host fibre channel port 0, physical link up
000:00:02:03:120 Host fibre channel port 1, physical link up
DCX
16: FCoE 3: Logs
Select the DCX option to show information similar to the following example:
---------------------------------------
LogID=9 LogName=DCX
---------------------------------------
000:00:00:00:250 dcx_initialize: DCX enabled and initialized
FCoE Utilities Menu for QLx81xx Adapters
(Command Line Option -cna)
The FCoE Utilities menu for the QLE81xx and QMI81xx converged network
adapters first prompts you to select an FCoE port, for example:
FCoE Utilities Menu
HBA Model QLE8142
1: Port
2: Port
3: Return to Previous Menu
When you select an online port, the following menu appears:
FCoE Utilities Menu
HBA Instance 0 (QLE8142 Port 1) : Online
SN0054614-00 K
1: Link Events
2: DCX
1: WWPN: 21-00-00-C0-DD-12-0D-ED Online
2: WWPN: 21-00-00-C0-DD-12-0D-EF SFP not installed
ENode MAC Addr: 00:C0:DD:12:0D:ED
WWPN : 21-00-00-C0-DD-12-0D-ED
Desc : QLE8142 QLogic PCI Express to 10 GbE Dual
Channel CNA (FCoE)
3–Interactive Commands
FCoE Menu (Command Line Option -cna)
3-111