Qlogic SANsurfer FC/CNA HBA CLI User Manual page 315

Command
Line Action
–d <file name >
–dm ( <hba instance> | <hba wwpn> |
<all> ) general | gen | details
| det
–e ( <hba instance> | <hba wwpn> )
( enable | 0 0 0 )
–e ( <hba instance> | <hba wwpn> )
( enable | 0 0 0 )
–e ( <hba instance> | <hba wwpn> )
( view | ? )
–e ( <hba instance> | <hba wwpn> )
( view | ? )
–e ( <hba instance> | <hba wwpn> )
disable [ prim | alt1 | alt2 |
alt3 ]
–e ( <hba instance> | <hba wwpn> )
disable [ prim | alt1 | alt2 |
alt3 ]
–e ( <hba instance> | <hba wwpn>
<target wwnn> <target wwpn>
<lun id> [ prim | alt1 | alt2 |
alt3]
SN0054614-00 K
Table D-2. Help Commands (Continued)
Arguments
D–Help Commands
Function
Performs a driver update to the adapters.
<file name> is the full path of the driver
file in inf/zip or exe format.
Runs a transceiver (SFF/SFP) diagnostics
on an adapter port and shows the result in
general or detail view. This feature is sup-
ported only with 4Gb adapter or latest. This
feature is not available with inbox driver
(SLES 10.0 / RHEL 5.0 or latest).
Selectable Boot: Configure the operating
system to boot from the first target the
BIOS finds.
Selectable Boot: Configure the operating
system to boot from the first target the
BIOS finds.
Shows the current boot device information
on an adapter port.
Shows the current boot device information
on an adapter port.
Clears the selected current boot device set-
tings on an adapter port
(prim/alt1/alt2 or alt3 Boot Port
Name). Configures all LUNs of all devices
attached to an adapter port (Disable).
Clears the selected current boot device set-
tings on an adapter port
(prim/alt1/alt2 or alt3 Boot Port
Name).
Configures the operating system to boot
from a specific target:
prim: Primary Boot Port Name
alt1: Alternate 1 Boot Port Name
alt2: Alternate 2 Boot Port Name
alt3: Alternate 3 Boot Port Name
D-3