Qlogic SANsurfer FC/CNA HBA CLI User Manual page 59

Port Information (repeats for each port) (Every port may not use all items):
Here is an example:
=================================
= InterConnect Element
=================================
Type
World Wide Node Name
World Wide Port Name
Vendor Id
HBA Model
HBA Serial Number
HBA Alias
Port Alias
Driver Version
Firmware Version
Total Number of Devices
SN0054614-00 K
General Information Menu (Command Line Option -g)
Number of Port
Beacon Status
Port Type
Port State
Physical Port Number (switch or adapter port number), including:
Port Name (WWPN)
Port State (Online or Loop Down)
Port Type
TX Port Type
Port Module Type
Attached Port (Repeats for every target/initiator that functions as an
attached port). (Not all items may appear for every port):
Target/Initiator
Node Name
Port Name
Vendor ID
Product ID (if applicable)
Product Revision (if applicable)
Product Serial Number (if applicable)
Adapter Model (if applicable)
Adapter Serial Number (if applicable)
Adapter Alias (if applicable)
Port Alias (if applicable)
Driver Version (if applicable)
Firmware version (if applicable)
Total number of devices (targets, if applicable)
Host (if applicable)
: HBA
: 20-00-00-E0-8B-03-55-7C
: 21-00-00-E0-8B-03-55-7C
: QLogic Corporation
: 2200
: C28437
:
:
: SCSI Miniport 8.1.5.15 (W2K IP)
: 2.02.03
: 0
3–Interactive Commands
=
3-7