Qos Bandwidth Menu - Qlogic SANsurfer FC/CNA HBA CLI User Manual

3–Interactive Commands
QoS Menu (Command Line Option -qos)
The QoS Priority Menu reappears and lists all the virtual ports.
5. Verify that the priority level is correct for the virtual port that you changed.
6. (Optional) To prevent further changes to the virtual port, set the mode to
Locked.
7. (Optional) To change the priority for additional virtual ports, repeat the
previous steps.
8. To save your QoS priority changes, select the Apply QoS Settings option.
NOTE:
The following confirmation appears:
Changes in QoS settings have been applied to selected vPort(s)

QoS Bandwidth Menu

15: QoS n: Port number
SANsurfer FC/CNA HBA CLI supports two different types of bandwidth for virtual
ports:
Bandwidth Speed specifies that the maximum bandwidth speed of all
virtual ports cannot exceed the maximum actual connection speed. (For
details, see
Bandwidth Percentage specifies that the maximum bandwidth percentage
of all virtual ports cannot exceed 100%. (For details, see
Percentage Menu" on page
The QoS Bandwidth Menu shows the adapter instance, model number, port
number, and the status, WWPN, and description of the selected physical adapter
port. It also lists all virtual ports created for that physical port. After you select a
virtual port, SANsurfer FC/CNA HBA CLI prompts you to select the bandwidth
type as either by speed or by percentage. For example:
QoS Bandwidth Menu
HBA Instance 0 (QMH2562 Port 1) : Online
3-104
4: Return to Previous Menu
Note: 0 to return to Main Menu
Enter Selection: 2
No changes made to QoS settings in the previous steps are saved until
you select Apply QoS Settings.
Hit <RETURN> to continue:
2: QoS Bandwidth
"QoS Bandwidth Speed Menu" on page
WWPN: 50-06-0B-00-00-C2-AE-00
3-107.)
3-105.)
"QoS Bandwidth
SN0054614-00 K