Qlogic SANsurfer FC/CNA HBA CLI User Manual page 81

Data Rate
3: HBA Parameters
This option shows the Data Rate menu. (Note that data rate configuration is not
available for all adapter port instances.) From this menu you can select:
Auto
1 Gbps
2 Gbps
4 Gbps
8 Gbps
NOTE:
Type the number for the data rate you want, and then press ENTER.
Frame Size
3: HBA Parameters
This option shows the Frame Size menu. From it you can select:
Frame Size: 512
Frame Size: 1024
Frame Size: 2048
Type the number for the frame size you want, and then press ENTER.
Hard Loop ID
3: HBA Parameters
This option prompts you to enter a valid Hard Loop ID from 0 to 125. Type the
number you want, and then press ENTER.
Loop Reset Delay
3: HBA Parameters
This option prompts you to enter a Reset Delay from 0 to 255 seconds. Type the
number you want for the loop reset delay, and then press ENTER.
SN0054614-00 K
N: Port Number 2: Configure HBA Parameters
The 1 Gbps data rate is not supported with 8G adapters.
QLE/QMI81xx adapters support 10Gbps only and cannot be modified.
N: Port Number 2: Configure HBA Parameters
N: Port Number 2: Configure HBA Parameters
N: Port Number 2: Configure HBA Parameters
3–Interactive Commands
HBA Parameters Menu
n. Data Rate
n. Frame Size
n. Hard Loop ID
n. Loop Reset Delay
3-29