All Targets - Qlogic SANsurfer FC/CNA HBA CLI User Manual

3. Delete
Names Menu. SANsurfer FC/CNA HBA CLI lists the existing LUN persistent
binding names, prompts you to select one for deletion, and then immediately
deletes the persistent LUN name. For example:
1: test1
2: Return to Previous Menu
Note: 0 to return to Main Menu
Enter Selection: 1
------------------------------------------------------------
Product Vendor
Product ID
Product Revision
LUN
WWULN
OS LUN Name
------------------------------------------------------------
Persistent LUN Name
Persistent device name of LUN 28 (TID 1) has been deleted.
Please reboot or run 'udevtrigger' command for the changes to take effect
Hit <RETURN> to continue:
CAUTION!
Do not delete a LUN's persistent device name if there is any active I/O on
the LUN.
For the persistent device name deletion to take effect, you must either reboot the
system or run the -udevtrigger command.

All Targets

4: Target/LUN List 1 - n Target List Menu Port n
When you select a specific LUN from the LUN list, the following information for all
LUNs appears:
Product Vendor
Product ID
Product Revision
LUN
Size
Type
WWULN
OS LUN Name (on Solaris and Linux)
(Repeats for each LUN)
SN0054614-00 K
Target/LUN List Menu (Command Line Options -t and -l)
To delete persistent binding for the LUN, select 3 on the Persistent
: SANBlaze
: VLUN FC RAMDisk
: 3.1.
: 28
: 60-00-62-B0-00-0F-53-50-00-00-00-00-00-00-00-1C
: /dev/sdbh;/dev/sg59;
: test1
1 - n: Target
3–Interactive Commands
m: All LUNs
3-41