Template Supported Parameter Settings For Qla24Xx/Qle24Xx And - Qlogic SANsurfer FC/CNA HBA CLI User Manual

Maximum LUNs Per Target specifies the maximum number of LUNs per
target. Multiple LUN support is typically for RAID boxes that use LUNs to
map drives.
Port Down Retry Count specifies the number of times SANsurfer FC/CNA
HBA CLI retries a command to a port returning port down status.
Link Down Timeout specifies the time the driver waits for the link to come
up after link down before returning the I/Os. This is analogous to the Port
Down Retry Count setting, which is used when the port is down.
The following tables list the parameter settings supported by templates for the
specified adapters by ISP number.
NOTE:
Settings that are effected by the template apply only to the ISP
2300/2310/2312 2Gb adapters and the ISP2422/2432 4Gb adapters.
Table 3-5. Template Supported Parameter Settings for QLA24xx/QLE24xx and QLE256x
Setting
Execution Throttle
Descending Loop ID Search
Maximum LUNs Per Target
Port Down Retry Count
Link Down Timeout
Information not currently available.
a
Table 3-6. Template Supported Parameter Settings for QLA24xx/QLE24xx and QLE256x
Setting
Execution Throttle
Descending Loop ID
Search
Maximum LUNs Per Target
Port Down Retry Count
Link Down Timeout
SN0054614-00 K
Adapters (ISP2422)
QLogic EMC
16 256
0 0
256
*
a
30 45
30 45
Adapters (ISP2432)
QLogic Dell
16 256
0 1
128 256
30 45
30 45
3–Interactive Commands
HP IBM
16 256
0
128 256
16 30
8 30
EMC HP
256 16
1 0
256 128
45 16
45 8
Utilities Menu
Sun
256
0 0
128
30
30
IBM Sun
256 16
0 0
256 128
30 30
30 30
3-67