System Configuration Problem Checklist; Fibre Channel Problem Checklist - Qlogic QLA 2342 User Manual

3 – Troubleshooting

System Configuration Problem Checklist

3.3
System Configuration Problem Checklist
All PCI-compliant and PCI-X-compliant systems automatically detect 32-bit or 64-bit
HBAs and set the appropriate bus speed (for example, 33 MHz or 133 MHz). Check
the motherboard for proper configuration (see the appropriate installation section
for more information.
See the documentation supplied with your computer, or contact your computer
dealer to determine if your motherboard requires special configuration.
3.4

Fibre Channel Problem Checklist

Were all of the FC devices powered up before you powered up the PC?
■
Check that all cables are properly connected.
■
Have you configured your RAID controller using the utilities provided by the
■
manufacturer?
Some Fibre Channel switches support zoning. Make sure that your switch is
■
configured correctly.
Make sure that data rate setting on the QLA2342/2342L matches the target
■
device. For example, if the QLA2342/2342L is set to 2 Gb, set the target device
to 2 Gb
If you are using a RAID box, modify the following settings in Fast!UTIL:
■
Login Retry Count = 60
❑
Port Down Retry Count = 60
❑
Execution Throttle = 100
❑
3-2
.
Q
FC5054602-00 A