Qlogic SANsurfer FC/CNA HBA CLI User Manual page 68

3–Interactive Commands
General Information Menu (Command Line Option -g)
HBA VPD Information
------------------------------------------------------------------------------
Feature is not supported with selected HBA (Instance 1 - 2200)!
------------------------------------------------------------------------------
HBA Parameters Settings
------------------------------------------------------------------------------
------------------------------------------------------------------------------
HBA Instance 1: 2200 Port 2 WWPN 21-01-00-E0-8B-23-55-7C PortID 11-06-00
------------------------------------------------------------------------------
Connection Options
Frame Size
Hard Loop ID
Loop Reset Delay (seconds)
Enable Host HBA BIOS
Enable Hard Loop ID
Enable FC Tape Support
Execution Throttle
Login Retry Count
Enable LIP Reset
Port Down Retry Count
Enable LIP Full Login
Link Down Timeout (seconds)
Enable Target Reset
LUNs Per Target
------------------------------------------------------------------------------
Driver Settings Information
------------------------------------------------------------------------------
------------------------------------------------------------------------------
HBA Instance 1: 2200 Port 2 WWPN 21-01-00-E0-8B-23-55-7C PortID 11-06-00
------------------------------------------------------------------------------
-----------------------------------
Driver Settings - Group: Persistent
-----------------------------------
Present targets that are persistently bound plus any new target(s)
Present targets that are persistently bound Only
--------------------------------
Driver Settings - Group: Binding
--------------------------------
Bind by World Wide Port Name
Bind by Port ID
------------------------------------------------------------------------------
Devices/LUNs Information
------------------------------------------------------------------------------
3-16
: 3 - Point-to-Point, Otherwise Loop
: 1024
: 0
: 5
: Disabled
: Disabled
: Enabled
: 16
: 8
: Disabled
: 30
: Enabled
: 0
: Enabled
: 8
: Enable
: Disable
: Enable
: Disable
SN0054614-00 K