Display (Host Topology) (Command Line Option -Tp | -Topology) - Qlogic SANsurfer FC/CNA HBA CLI User Manual

3–Interactive Commands
General Information Menu (Command Line Option -g)
Save As Txt file
Save As XML File
Display (Host Topology)
(
Command Line Option -tp | -topology)
1: General Information 2: Host Topology
The host topology option shows information about interconnect elements
(switches or adapters) and switch ports.
NOTE:
Attached Port means a QLogic adapter, a tape or disk target device, or GBIC
connected to a physical port on a switch.
If the interconnect element is a switch:
Interconnect element (switch)
If the interconnect element is an adapter:
Interconnect element (adapter)
3-6
1: Display
Type (Switch or adapter)
World wide name
Domain ID
Management ID
IP address
Model
Symbolic name
Serial number
MAC address
Firmware version
Port count
Beacon status
Type
World wide node name
World wide port name
Vendor ID
Adapter Model
Adapter Serial Number
Adapter Alias
Port Alias
Driver Version
Firmware Version
Total Number of Devices
Host
SN0054614-00 K