Error/Exit Return Codes - Qlogic SANsurfer FC/CNA HBA CLI User Manual

C

Error/Exit Return Codes

To list the error/exit return codes while running SANsurfer FC/CNA HBA CLI in
interactive mode:
1. From the Main Menu, select the Help option, and then press ENTER.
2. On the Help Menu, select Exit Codes, and then press ENTER.
To list the SANsurfer FC/CNA HBA CLI non-interactive error/exit codes from the
command line, type:
scli -ei
SANsurfer FC/CNA HBA CLI lists the error/exit return code numbers, names, and
descriptions as shown in
NOTE:
Error return codes are continually being updated. Although
accurate at the time this document was written, you should check for the
latest return codes in the file, Fcscli-exicodes.txt, located in the
SANsurfer FC/CNA HBA CLI installation directory.
Return
Code
0 SUCCESS
1 ERROR_OPEN_FILE
2 ERROR_READ_FILE
3 ERROR_WRITE_FILE
4 ERROR_CLOSE_FILE
5 ERROR_INCORRECT_FILE
6 ERROR_INCORRECT_FILE_SIZE
7 ERROR_UNSUPPORTED_HBA
SN0054614-00 K
Table C-1.
Table C-1. Error/Exit Return Codes
Name Description
Command executed with no error
Failed to open file
Failed to read file
Failed to write to a file
Failed to close a file
Selected file is incorrect
File size is incorrect
Adapter is unsupported
Table C-1 was
C-1