Selective Luns Menu (Command Line Option -M); Selective Luns (Per Adapter Port); Selective Luns (All Hbas); Display Lun Configuration - Qlogic SANsurfer FC/CNA HBA CLI User Manual

3–Interactive Commands

Selective LUNs Menu (Command Line Option -m)

Selective LUNs Menu
(Command Line Option -m)
7: Selective LUNs
When you select this option, SANsurfer FC/CNA HBA CLI shows the Selective
LUNs Menu (see ), allowing you to select an individual adapter port or All HBAs.

Selective LUNs (Per Adapter Port)

7: Selective LUNs 1: - m: HBA Port Instance
When you select this option, SANsurfer FC/CNA HBA CLI shows the following
options for the adapter:

Display LUN Configuration

Manual Configure LUNs
Auto Configure LUNs
If this option is not available for the selected LUN, the following message appears:
Configuration not permitted.
persistently bound (HBA n)!

Selective LUNs (All HBAs)

7: Selective LUNs 1: All HBAs
When you select this option, SANsurfer FC/CNA HBA CLI shows the following
options for all adapters:
Display LUN Configuration
Manual Configure LUNs
Auto Configure LUNs
Display LUN Configuration
7: Selective LUNs 1-m: Port Number
When you select the Display LUN Configuration menu, you can choose to show
either:
Details View
General View
The detailed view shows:
Selective LUN Menu (Display)
HBA Instance 5 (QLA2300 Port 2) : Online
WWPN: 21-01-00-E0-8B-25-CB-D8
Desc: QLA2302 VA-CPQ (PCI to FC dual channel) HP Appliance
3-58
Device(s) either not present or not
1: Display LUN Configuration
SN0054614-00 K