Hba Parameters (Per Fcoe Engine); Display Fcoe Parameters; Configure Fcoe Parameters - Qlogic SANsurfer FC/CNA HBA CLI User Manual

HBA Parameters (Per FCoE Engine)

3: HBA Parameters n: FCoE Engine
The FCoE Parameters menu appears only for the QLE8042 adapter and has the
following options:

Display FCoE Parameters

Configure FCoE Parameters

Return to Previous Menu
Display FCoE Parameters
3: HBA Parameters n: FCoE Engine
When you select this option, the FCoE Port Selection menu appears. Select a
port number and then press ENTER to show the FCoE parameters for that
instance, as shown in the following example:
FCoE Port Selection Menu
FCoE Engine (QLE8042)
Desc: QLE8042 Mercury CNA
1: Port 0
2: Port 1
3: Return to Previous Menu
------------------------------------------------------
FCoE Parameters Port 0
------------------------------------------------------
Host Name
HBA Instance
HBA Model
HBA Description
Port Type
Pause Type
Priority Pause Mask
FCoE Config
FCoE COS
Configure FCoE Parameters
3: HBA Parameters n: FCoE Engine
When you select this option, the FCoE Port Selection menu appears. Select a
port number and then press ENTER to list the configurable FCoE parameters for
that instance. For example:
SN0054614-00 K
1: Display FCoE Parameters
Note: 0 to return to Main Menu
Enter Selection: 1
2: Configure FCoE Parameters
3–Interactive Commands
HBA Parameters Menu
: TARGET3
: 3
: QLE8042
: QLE8042 Mercury CNA
: Access
: Priority Flow Control
: 0[ ] 1[ ] 2[ ] 3[x] 4[ ] 5[ ]
6[ ] 7[ ]
: T11 Rev 0 Frame Format
: 3
3-33