Qlogic SANsurfer FC/CNA HBA CLI User Manual page 144

3–Interactive Commands
Statistics Menu (Command Line Options -gs and -ls)
Resetting to default settings..., done.
Auto Poll
13: Statistics 1: HBA Statistics
SANsurfer FC/CNA HBA CLI shows two polling options:
AutoPoll
Manual Poll
If you select the Auto Poll option, the system enables Auto Poll and returns a
message:
Auto Poll enabled.
If you select the Manual Poll option, the system prompts you to enter a value for
Manual Poll iteration:
Manual Poll iteration (1-256)
Enter a value from 1 to 256, and then press ENTER. The system updates the
Manual Poll iteration value and returns the following message:
Manual Poll updated.
Set Rate
13: Statistics 1: HBA Statistics
The system prompts you to enter a value for the sampling rate (the current rate is
shown in parentheses):
Sampling Rate Seconds [5-30](n):
Enter a value from 5 to 30, and then press ENTER. The system updates the
sampling rate and returns a message:
Sampling rate updated.
Log to File
13: Statistics 1: HBA Statistics
When you select the Log to File option, the system prompts you to enter a file
name or press ENTER to cancel.
If you press the ENTER key, the HBA Statistics Settings Menu reappears.
If you enter a file name, for example, MyFile, the system saves the log to that file
and returns a message:
Save to file option enabled (MyFile.csv).
3-92
1: Configuration 3: Auto Poll
1: Configuration 4: Set Rate
1: Configuration 5: Log To file
SN0054614-00 K