Display All Information For One Or All Adapters; Option -Z; B-1 Options Shown By -Z - Qlogic SANsurfer FC/CNA HBA CLI User Manual

<HBA>
<HBA Instance="value" HBAModel="value" HBAPort="value"
WWNN="value" WWPN="value" />
<DriverSettings>
<Info PersistentPlusNew="value"
PersistentOnly="value"
BindbyWWPN="value"
BindbyPortID="value" />
</DriverSettings>
</HBA>
<Status> n </Status>
<?ErrorMsg> "message" </ErrorMsg?>
<Reboot> n /Reboot>
</QLogic>

Display All Information for One or All Adapters

(Command Line Option -z)
The XML Format 2 for all adapter information is more complicated than its
non-XML counterpart because the tags cannot be repeated. In non-XML mode,
SANsurfer FC/CNA HBA CLI sequentially calls all the options in
each option is shown in its standard output format. If each option shows its own
XML2 output, the resulting display would have multiple duplicate tags.
Non-
interactive
Option
-g
-i
-c
-t
-l
-p
-m
SN0054614-00 K
Table B-1. Options Shown by -z
Description
Show system information
Show adapter information
Show adapter settings
Show device list
Show LUN list
Target persistent binding
Selective LUNs
XML Format 2 Tags for Each Option
See User Guide Section
"Display System Information (Command
Line Options -g, -z, and -tp)" on page 4-1
"-i (Display HBA General Information or
VPD Information for One or All HBAs)" on
page 4-20
"-c (Show Parameter Settings)" on
page 4-8
"-t (Display Target Information)" on
page 4-45
"-l (Display LUN Info)" on page 4-32
"-p (Display Persistent Target Binding
Info)" on page 4-38
"-m (View, Enable, or Disable LUNs)" on
page 4-33
B–XML Format 2
Table B-1, and
B-13