Qlogic SANsurfer FC/CNA HBA CLI User Manual page 316

D–Help Commands
Command
Line Action
–e ( <hba instance> | <hba wwpn>
<target wwnn> <target wwpn>
<lun id> [ prim | alt1 | alt2 |
alt3]
–e ( view | ? )
–e ( view | ? )
–ei –
–f <file name>
-fcoe ( <hba instance> | <hba wwpn> )
--info
-fcoe ( <hba instance> | <hba wwpn> )
--getparam --portx
-fcoe ( <hba instance> | <hba wwpn> )
--setparam --portx ( { <param
name> | <param alias> ) <param
value> }
-fcoe ( <hba instance> | <hba wwpn> )
--loadfw <firmware file>
-fcoe ( <hba instance> | <hba wwpn> )
--mon --nsl --portx
-fcoe ( <hba instance> | <hba wwpn> )
--log --list
-fcoe ( <hba instance> | <hba wwpn> )
--log --id <logid>
–fg ( <hba instance> | <hba wwpn> )
( view | ? )
D-4
Table D-2. Help Commands (Continued)
Arguments Function
Configures the operating system to boot
from a specific target:
prim: Primary Boot Port Name
alt1: Alternate 1 Boot Port Name
alt2: Alternate 2 Boot Port Name
alt3: Alternate 3 Boot Port Name
Shows the current boot device information
on all adapters.
Shows the current boot device information
on all adapters.
Lists the exit codes.
Executes from a command input file.
Option –f cannot be combined with any
other options.
Shows current FCoE firmware version.
Shows FCoE parameters of specified port.
Modifies FCoE parameters of specified
port.
Updates FCoE firmware.
Shows FCoE network interface statistics of
specified port.
Shows FCoE available log IDs.
Shows the log specified by the log ID.
Shows the current driver settings.
SN0054614-00 K