Host Topology (Command Line Option -Tp | -Topology) - Qlogic SANsurfer FC/CNA HBA CLI User Manual

Total number of QLogic adapters detected
NOTE:
The SAN Device Management (SDM) API is a QLogic-specific library
required for SANsurfer FC/CNA HBA CLI. The version number of this library
is useful in debugging.
------------------------------------------------------------------------------
Host Name
OS Type
OS Version
SDM API Uersion
------------------------------------------------------------------------------
HBA Model QLA2342 (SN C28750):
Port 1 WWPN 21-00-00-E0-8B-01-43-9B SN B05283 (HBA Instance 0) Online
Port 2 WWPN 21-01-00-E0-8B-21-43-9B SN B05283 (HBA Instance 1) Online
HBA Model QLA2300 (SN D825408):
Port 1 WWPN 21-00-00-E0-8B-05-CB-D8 SN D83179 (HBA Instance 2) Loop down
Port 2 WWPN 21-01-00-E0-8B-25-CB-D8 SN D83179 (HBA Instance 3) Online
HBA Model QLA2462 (SN FFC0551C34679):
Port 1 WWPN 21-00-00-E0-8B-1F-9D-F0 SN FFC0519U93213 (HBA Instance 4)
Online
Port 2 WWPN 21-01-00-E0-8B-3F-9D-P0 SN FFC0519U93213 (HBA Instance 5) Loop
down
HBA Model QLA21O (SN C655417):
Port 1 WWPN 21—00—00—E0—8B—1A—3F—E0 SN R61343 (HBA Instance 6) Online
-----------------------------------------------------------------------------
Total QLogic HBA(s) : 4
Host Topology
(Command Line Option -tp | -topology)
1: General Information 2: Host Topology
This option shows you the HBA Host Topology menu.
NOTE:
Under Linux, host topology (-tp) is disabled if you are using the IOCTL or
sysfs (inbox) driver.
From the General Information Menu, type the number for Host Topology, and
then press ENTER. When you select this option, the following options appear:
Display
SN0054614-00 K
General Information Menu (Command Line Option -g)
: BRAGI
: Microsoft Windows Svr 2003 Enterprise Ed. x86
: Service Pack 1 (Build 3790
: 1.28.0.50 QLSDM.DLL
3–Interactive Commands
3-5