Boot Device Menu (Command Line Option -E); Hba Port Instance; Boot Device(S) (Per Adapter Port) - Qlogic SANsurfer FC/CNA HBA CLI User Manual

3–Interactive Commands

Boot Device Menu (Command Line Option -e)

Please reboot the system for the saved configuration to become
effective.
Boot Device Menu
(Command Line Option -e)
8: Boot Device
NOTE:
The Boot Device Menu option is not supported on Red Hat or Novell
PowerPC64.
When you select this option, SANsurfer FC/CNA HBA CLI shows the standard
HBA Port Instance menu (see
select an individual adapter port or All HBAs.

HBA Port Instance

8: Boot Device 1 - m: HBA Port Instance
When you select this option, SANsurfer FC/CNA HBA CLI shows the Boot
Device Settings menu for adapter instance m. You can choose to:
Display Boot Device(s)
Configure Boot Device(s)

Boot Device(s) (Per Adapter Port)

8: Boot Device n: Port Number
When you select this option, SANsurfer FC/CNA HBA CLI shows the following
information about the boot devices for this adapter instance:
Adapter Instance Number
Adapter Model Number (QLAxxxx)
Port Number (on that adapter)
WWPN
Port ID
Boot Device Settings
Selectable Boot (Enabled/Disabled)
Primary Boot Port Name (WWPN) and LUN
Alternate 1 Boot Port Name and LUN
Alternate 2 Boot Port Name and LUN
Alternate 3 Boot Port Name and LUN
For example:
3-60
"HBA Port Instance" on page
1: Display Boot Device(s)
3-49) allowing you to
SN0054614-00 K