Display System Information (Command Line Option -G) - Qlogic SANsurfer FC/CNA HBA CLI User Manual

"Display Device List (Command Line Option -t)" on page A-7
"Display LUN List (Command Line Option -l)" on page A-7
"Target Persistent Binding (Command Line Option -p)" on page A-8
"Selective LUNs (Command Line Option -m)" on page A-8
"Boot Device (Command Line Option -e)" on page A-9
"Diagnostics Results—Loopback Test (Command Line Option -kl)" on
page A-9
"Diagnostics Results—Read/Write Buffer Test (Command Line Option -kr)"
on page A-10
"View Driver Settings (Command Line Option -fg)" on page A-10
"Display All Information for One or All Adapters (Command Line Option -z)"
on page A-11
"Link Statistics (Command Line Option -ls)" on page A-14
"HBA Statistics (Command Line Option -gs)" on page A-14
"HBA Alias (Command Line Option -ha)" on page A-15
"HBA Port Alias (Command Line Option -pa)" on page A-15
"Display FCoE Information" on page A-22
"Display FCoE Parameters" on page A-23
"Display FCoE Link Events" on page A-23
"Display FCoE DCBX" on page A-25
"Display FCoE Network Interface Statistics" on page A-26
NOTE:
In these sections, the term number refers to the adapter number shown with
the adapter general information (command line option -i).
Display System Information
(Command Line Option -g)
The XML format 1 for system information output is as follows:
<?xml version="1.0" encoding="ISO-8859-1"?>
<QLogic>
<AppName>SANsurfer FC/CNA HBA CLI</AppName>
<AppVersion>vn.nn.nn Build nn</AppVersion>
<Host>
SN0054614-00 K
<Name> Host Name </Name>
<OSType> OS Type </OSType>
A–XML Format 1
XML Format 1 Tags for Each Option
A-3