Qlogic SANsurfer FC/CNA HBA CLI User Manual page 319

Command
Line Action
–p ( <hba instance> | <hba wwpn> )
{ <target wwnn> <target wwpn>
<target portid> <target id> }
–p ( <hba instance> | <hba wwpn> )
remove <target wwnn> | unbind
<target wwnn>
–p ( <hba instance> | <hba wwpn> |
<all> ) ( view | ? )
–p ( <hba instance> | <hba wwpn> |
<all> ) bind all
–p ( <hba instance> | <hba wwpn> |
<all> ) remove all | unbind all
–pa ( <hba instance> | <hba wwpn> )
<alias>
–pa ( <hba instance> | <hba wwpn> )
delete
–pa ( <hba instance> | <hba wwpn> )
view | ?
-pl <hba instance>|<hba wwpn>
--info [<target id> <lun id>]
-pl <hba instance>|<hba wwpn> --set
{<target id> <lun id> <lun
name>}
-pl <hba instance>|<hba wwpn> --del
{<target id> <lun id> <lun
name>}
–q ( <hba instance> | <hba wwpn> )
{ <target wwpn> <speed> }
–q ( <hba instance> | <hba wwpn> )
<target wwpn>
–q ( <hba instance> | <hba wwpn> |
<all> ) ( –targets | –t )
<speed>
SN0054614-00 K
Table D-2. Help Commands (Continued)
Arguments
D–Help Commands
Function
Binds the selected device(s) attached to an
adapter port.
Unbinds a specific device attached to an
adapter port.
Shows the current persistent binding con-
figuration on an adapter port or all adapt-
ers.
Binds all device(s) attached to an adapter
port or all adapters.
Unbinds all device(s) attached to an
adapter port or all adapters.
Sets an alias to an adapter port.
Deletes the current alias of an adapter port.
Shows the current alias of an adapter port.
Shows persistent device names for a spe-
cific LUN or all LUNs. (Linux only)
Adds a persistent device name to a specific
LUN. (Linux only)
Removes the existing persistent device
name currently assigned to a specific LUN.
(Linux only)
Modifies the iiDMA settings of selected tar-
get(s) on an adapter port. This feature is
supported only on 4Gb or latest adapters.
Shows the current iiDMA settings of a spe-
cific target on an adapter port.
Modifies the iiDMA settings of all targets on
an adapter port or all adapters.
D-7