Solaris Installation; Solaris Sparc 8, 9, 10 Installation - Qlogic SANsurfer FC/CNA HBA CLI User Manual

2. Decompress the file with the following command:
3. Enter the following command to install the package:
NOTE:
The new package is installed in the following directory:
/opt/QLogic_Corporation/SANsurferCLI
To query for the installed SANsurfer FC/CNA HBA CLI package name, enter the
following text from the command line:
rpm -q scli

Solaris Installation

To install SANsurfer FC/CNA HBA CLI on Solaris, follow the steps in one of these
sections:
"Solaris SPARC 8, 9, 10 Installation" on page 1-15
"Solaris x86 9 and 10 Installation" on page 1-17

Solaris SPARC 8, 9, 10 Installation

Follow these steps to install SANsurfer FC/CNA HBA CLI on a Solaris SPARC 8,
9, or 10 operating system.
To install SANsurfer FC/CNA HBA CLI on Solaris 8, 9, or 10:
1. From the QLogic Web site or the SANsurfer for FC and FCoE Adapters
CD-ROM, download to a temporary directory (for example, /tmp) on your
machine the following file:
NOTE:
SN0054614-00 K
gunzip <file name>
rpm -iv scli-x.xx.xx-xx.i386.rpm
For SUSE SLES IA64, the command line is:
rpm --iv scli-x.xx.xx-xx.ia64.rpm --nodeps
scli-x.xx.xx-xx.sparc.Solaris.pkg
In the file name, x.xx.xx-xx stands for the current version of
SANsurfer FC/CNA HBA CLI. The -xx stands for the build version.
1–Installation and Removal
Installing SANsurfer FC/CNA HBA CLI
1-15