Qlogic SANsurfer FC/CNA HBA CLI User Manual page 307

Table C-1. Error/Exit Return Codes (Continued)
Return
Code
312 ERROR_GET_MENLO_ETH_MONITORING
313 ERROR_GET_MENLO_FC_MONITORING
314 ERROR_GET_MENLO_NSL_MONITORING
315 ERROR_CORRUPTED_LOG_DATA
316 ERROR_NO_MATCHING_LOG_ID
317 ERROR_READ_MENLO_MEMORY
318 ERROR_WRITE_MENLO_MEMORY
319 ERROR_RETRIEVING_MENLO_LOG_
LAYOUT
320 ERROR_RETRIEVING_MENLO_LOG_ID
321 ERROR_INVALID_OFFSET
322 ERROR_INVALID_BYTES
323 ERROR_INVALID_DIAG_ADDRESS
324 ERROR_INVALID_DIAG_SIZE
325 ERROR_INVALID_DIAG_INPUTS
326 ERROR_RETRIEVING_MENLO_PANIC_LOG Failed to retrieve FCoE panic log
327 ERROR_NO_PANIC_LOG_FOUND
328 ERROR_FCOE_PARAMS_INVALID
329 ERROR_FCOE_PARAMS_UNSUPPORT
330 FLASH_VER_CTRL_FILE_MISSING
331 FLASH_UPDATE_NOT_NEEDED
332 FLASH_UPDATE_ALL_FAILED
333 FLASH_UPDATE_SOME_FAILED
334 FLASH_NO_ENTRY_FLASH_CFG_FILE
SN0054614-00 K
Name
C–Error/Exit Return Codes
Description
Failed to query FCoE Ethernet port statis-
tics
Failed to query FCoE FC port statistics
Failed to query FCoE NSL port statistics
FCoE log data seems to be corrupted
Unable to find the specified log that
matched with the log ID
FCoE diagnostics read memory failed
FCoE diagnostics write memory failed
Failed to query FCoE log layout
Failed to retrieve FCoE log data
Invalid offset input
Invalid bytes input
Invalid FCoE memory buffer address
Invalid FCoE memory buffer size
Invalid FCoE inputs
FCoE panic log not found
FCoE parameter settings is invalid
FCoE parameter settings is unsupported
Flash version config file is missing
Adapter boot code does not require
upgrade
Flash update failed with all adapters
Flash update completed with errors (some
adapters failed to be upgraded)
Adapter entry is missing in the Flash ver-
sion config file
C-15