Starting Non-Interactive Mode; Non-Interactive Mode Options - Qlogic SANsurfer FC/CNA HBA CLI User Manual

2–Getting Started

Starting Non-Interactive Mode

Starting Non-Interactive Mode
To start SANsurfer FC/CNA HBA CLI in non-interactive mode, type the following
in a command window:
scli <parameters>
SANsurfer FC/CNA HBA CLI executes the command options, and then
terminates.
To list all of the available command line parameters and the SANsurfer FC/CNA
HBA CLI version, type one of the following:
scli -h
scli -?
In Solaris SPARC, include double quotes around the view option (?) if the system
is running with a csh or tsch shell. For example:
# scli -e 0 "?"
For world wide node name (WWNN), world wide port name (WWPN), and port ID
parameter inputs, SANsurfer FC/CNA HBA CLI accepts the notation with and
without the dash (–). Hexadecimal values can be uppercase or lowercase.
The following input formats are both valid for the WWNN and WWPN:
20-00-00-E0-8B-01-83-C4
200000E08B0183C4
The following inputs are valid for the port ID:
68-5C-AB 685CAB
All command line options must be preceded by the dash (–) or forward slash (/)
notation. Most options have a corresponding menu selection in interactive mode.
Table 2-1
selection by OS, and provides a description and cross-reference.
Interactive
CLI
Menu
Option
(Windows)
11
-a
2-4
lists all valid command line options, shows the corresponding menu
Table 2-1. Non-interactive Mode Options
Interactive
Menu (Red
Interactive
Hat/SUSE
Menu
Linux,
(Macintosh)
Solaris
SPARC)
11 11
.
Description
Flash adapter beacon
See User Guide
Section
"-a (View or Tog-
gle Beacon Sta-
tus)" on page 4-6
SN0054614-00 K