Editing Enforcement Clusters - Extreme Networks AG200 User Manual

3 The following cluster settings take on default values set from the System configuration window. To
set up operating parameters that differ from those default settings, select the menu item of the
settings you want to change, then select the For this cluster, override the default settings check box,
and make the desired changes. Refer to the sections listed below to set up the default values, or for
more information on the specific settings.
Testing methods—See "Testing Methods" on page 113
■
Accessible services—See "Accessible Services" on page 115
■
Exceptions—See "Exceptions" on page 118
■
Notifications—See "Notifications" on page 119
■
End-user screens—See "End-user Screens" on page 121
■
Agentless credentials—See "Agentless Credentials" on page 124
■
Logging—See "Logging" on page 128
■
Advanced—See "Advanced Settings" on page 130
■

Editing Enforcement Clusters

To edit the Enforcement clusters settings:
Sentriant AG Home window>>System configuration>>Enforcement clusters & servers
1 Click the cluster you want to edit. The Enforcement cluster window appears, as shown in
on page 48.
2 Click a menu option to access the cluster settings:
General
■
Quarantining
■
Testing methods
■
Accessible services
■
Exceptions
■
Notifications
■
End-user screens
■
Agentless credentials
■
Logging
■
Advanced
■
3 Enter or change information in the fields you want to modify, as described in "Adding an
Enforcement Cluster" on page 45.
4 Click ok.
Sentriant AG Users' Guide, Version 5.0
System Configuration
Figure 9
47