Opening An Existing Policy; Opening A Policy File Locally - Extreme Networks Policy Manager User Manual

Viewing Policies and Rules
Between the Access Control List rules panel and the CLEAR-Flow Rules panel are two icon arrows
which toggle filters on and off.
A toggle button that when clicked filters the CLEAR-Flow rules to show only those that are
referenced by the selected ACL rule. In the CF Rule Detail panel, the reference is highlighted in
yellow. Click the button a second time to toggle the filter off and again show all CLEAR-Flow
rules.
A toggle button that when clicked filters the ACL rules to show only those that are referenced by
the selected CLEAR-Flow rule. In the ACL Rule Detail panel, the reference is highlighted in
yellow. Click the button a second time to toggle the filter off and again show ACL rules.

Opening an Existing Policy

An existing policy file can be opened from either a local file or a switch.

Opening a Policy File Locally

1 Choose File > Open > Local. The Open dialog box appears.
2 Navigate to a policy and click Open.
When the process is successful, an Operation Progress box is displayed as the policy is opened,
followed by the following Validation Notice screen, that shows the path to the policy.
When the EPM cannot find the required metadata to determine the policy file version, a Policy
Version Notice box is displayed that requests more information.
a Click OK. A Policy Version Selection box is displayed.
b From the Versions: panel, select an appropriate version based on information in the Description
panel and click OK. The Operation Progress box is displayed followed by a Validation Notice.
30
Extreme Networks Policy Manager (EPM) 1.2 User Guide