Multiplication; Division - Rigol DS2000E Series User Manual

Chapter 6 MATH and Measurements
Press Label to define a label for the operation results. For the details, please

refer to "MATH Label".
HORIZONTAL

used to adjust the horizontal position and scale of the operation results.

Multiplication

Multiply the waveform voltage values of signal source A and B point by point and
display the results. Press MATH  Operate to select "A x B":
Press Source A and Source B respectively to select the desired channels (CH1

or CH2).
Press and use

Press and use

Press Invert to turn the inverted display of the operation results on or off.

Press Label to define a label for the operation results. For the details, please

refer to "MATH Label".
HORIZONTAL

used to adjust the horizontal position and scale of the operation results.

Division

Divide the waveform voltage values of signal source A by that of source B point by
point and display the results. It can be used to analyze the multiple relationships of
waveforms in the two channels.
Note: When the waveform voltage value of signal source B is 0, the result of the
division is treated as 0.
Press MATH  Operate to select "A ÷ B":
Press Source A and Source B respectively to select the desired channels (CH1

or CH2).
Press and use

Press and use

Press Invert to turn the inverted display of the operation results on or off.

Press Label to define a label for the operation results. For the details, please

refer to "MATH Label".
DS2000E User's Guide
POSITION and HORIZONTAL
to adjust the vertical position of the operation results.
to adjust the vertical scale of the operation results.
POSITION and HORIZONTAL
to adjust the vertical position of the operation results.
to adjust the vertical scale of the operation results.
RIGOL
SCALE can also be
SCALE can also be
6-3