Margin/Centering, Margin, Centering - Kyocera TASKalfa 6003i Operation Manual

Using Various Functions > Functions

Margin/Centering, Margin, Centering

Layout/Edit
Copy
Copying/Printing
Add margins (white space). In addition, you can set the margin width and the back page margin.
Centering: Centers the original image on the paper when copying onto paper different from the original size.
NOTE
The default setting for margin width can be changed.
Margin Default (page 8-20)
Item
Off
Margin Left/Right
Top/Bottom
Back Page
Original
Orientation
*3
Centering Original
Orientation
*1 The input units can be changed in System Menu.
Measurement (page 8-15)
*2 This function can only be used when the optional OCR Scan Activation Kit is installed.
*3 Not displayed when printing from USB drive.
Advanced
Custom
Send
Setup
Box
Value
Metric: -18 mm to +18 mm
(in 1 mm increments)
Inch: -0.75" to +0.75"
(in 0.01" increments)
Auto, Manual
Top Edge on Top, Top Edge
on Left, Auto
Top Edge on Top, Top Edge
on Left, Auto
Functions USB
Drive
Set the margin width.
Select [+] or [-] to enter the margins for "Left/
Right" and "Top/Bottom". Select [# Keys] to use
the numeric keys for entry.
For duplex copying, select [Back Page] and
select [Auto] or [Manual].
When [Auto] is selected, an appropriate margin is
applied automatically on the rear page depending
on a margin specified for the front page and a
binding orientation.
When [Manual] is set, you can set a different
margin than the front on the back. Set the margin
in the screen that is displayed. The setting
selections are the same as for the front.
Select the orientation of the original document top
*2
edge to scan correct direction.
Select [Original Orientation] to choose
orientation of the originals, either [Top Edge on
Top] or [Top Edge on Left]. Then select [OK].
Select the orientation of the original document top
*2
edge to scan correct direction.
Select [Original Orientation] to choose
orientation of the originals, either [Top Edge on
Top] or [Top Edge on Left]. Then select [OK].
6-43
Functions
Description
*1