Control Commands - Epson TM-U925 Manual

6.2 Control Commands

LF
[Name] Print and line feed
[Format] ASCII
Hex
Decimal
[Description] Prints the data in the print buffer and feeds one line based on the current line spacing.
[Note] Sets the print starting position to the beginning of the line.
[Reference] ESC 2, ESC 3
FF
[Name] Print and eject cut paper
[Format] ASCII
Hex
Decimal
[Description] Prints the data in the print buffer and ejects the slip paper.
· This command is enabled only when slip paper is selected for printing.
[Notes]
· Paper ejection continues until the paper is completely ejected. When the slip ejection
length has been set by ESC C, the specified length is ejected regardless of the slip
ejection sensor.
· After the slip is ejected, the printer selects the default paper type specified by ESC c 0.
· The slip is ejected in the forward direction only.
[Reference] ESC c 0, ESC C
EPSON
LF
0A
10
FF
0C
12
TITLE
TM-U925
Specification
(STANDARD)
SHEET NO.
REVISION
NEXT
A
56
SHEET
55