Using A Customized Web Authentication Login Window From An External Web Server - Cisco SD2008T-NA Configuration Manual

Chapter 9 Managing User Accounts
Custom Redirect URL......... http://www.AcompanyBC.com
Web Authentication Mode..... Disabled
Web Authentication URL........ Disabled
Using a Customized Web Authentication Login Window from an External Web
Server
If you want to use a customized web authentication login window that you configured on an external web
server, follow the instructions in the GUI or CLI procedure below. When you enable this feature, the user
is directed to your customized login window on the external web server.
You must configure a preauthentication access control list (ACL) on the WLAN for the external web
Note
server and then choose this ACL as the WLAN preauthentication ACL under Security Policies > Web
Policy on the WLANs > Edit page. See
information on ACLs.
Using the GUI to Choose a Customized Web Authentication Login Window from an External Web
Server
Click Security > Web Login Page to access the Web Login page (see
Step 1
Figure 9-12 Web Login Page
From the Web Authentication Type drop-down box, choose External (Redirect to external server).
Step 2
In the URL field, enter the URL of the customized web authentication login window on your web server.
Step 3
You can enter up to 252 characters.
In the Web Server IP Address field, enter the IP address of your web server. Your web server should be
Step 4
on a different network from the controller service port network.
OL-9141-03
Choosing the Web Authentication Login Window
Chapter 5, "Configuring Access Control Lists"
Cisco Wireless LAN Controller Configuration Guide
for more
Figure 9-12).
9-13