Catalyst 3750G Integrated Wireless Lan Controller Switch - Cisco SD2008T-NA Configuration Manual

Catalyst 3750G Integrated Wireless LAN Controller Switch

Catalyst 3750G Integrated Wireless LAN Controller Switch
Figure E-3
3750G Switch
These commands are used for communication between the Catalyst 3750G switch and the 4402
controller.
Login Command
This command is used to initiate a telnet session from the switch to the controller:
session switch_number processor 1
Because there can be several switches in a stack, the switch_number parameter is used to indicate to
which controller in the stack this session should be directed. Once a session is established, the user
interacts with the controller CLI. Entering exit terminates the session and returns the user to the switch
CLI.
Show Commands
These commands are used to view the status of the internal controller. They are initiated from the switch.
•
Cisco Wireless LAN Controller Configuration Guide
E-6
Logical Connectivity Diagram for the Catalyst 3750G Integrated Wireless LAN
Controller Switch
RS-232 Serial
at 9600 baud
Console
Hidden
2 SFP Ports
G1/0/27
G1/0/28
Hidden
2 SFP Ports
Port 1
Port 2
4402
Controller
Console
RS-232 Serial
at 9600 baud
show platform wireless-controller switch_number summary
Information similar to the following appears:
Switch Status State
1 up operational
2 up operational
G1/0/1 through G1/0/24
24 Gig PoE Ports
Switch Motherboard
Memory Boot Flash
Memory Boot Flash
Controller Motherboard
Gig E Service
Ethernet
Appendix E Logical Connectivity Diagrams
G1/0/25
G1/0/26
2 SFP Ports
Flash File System
Flash File System
on CF Card
Do not remove
OL-9141-03